Plumbing Tips To Help You With Your Needs - Call Your Local Roseville Plumbing Company @ 916-452-4154
It is common for plumbing problems to start right after you buy your home. These problems typically occur in bathrooms and kitchens. Usually, homeowners have to handle plumbing issues at some point. The following advice will assist you, should this situation arise.
Rigid copper is used for main water lines in many homes. You cannot bend rigid copper, so joints and tees must be soldered on. When soldering, always apply flux (also called soldering paste) to both surfaces. Flux retards oxidation when the copper is heated. Always use lead-free or nearly lead-free solder when sweating a copper joint.
Use the sounds you hear from your pipes to help you to determine what they problem is. Certain sounds mean the water pressure is too high. Other sounds can signify loose pipes or slight clogs from calcium or iron build up. Listening to your pipes can save you a lot of money hunting down the problem.
Plumbing
Before you start a plumbing project you should tighten all of the pipes that are easily accessible. Especially if your pipes are making a range of loud banging sounds, as this is a clear sign that there are loose pipes along the line. It is also a good idea in case there is a clog so the excess pressure released does not break a loose pipe.
Make sure you know where your home's water shutoff is located. You never know when there might be an emergency involving a broken pipe or damaged connection that requires you to turn off the water right away. In addition, knowing where the shutoff is located is vital before you start any plumbing project, in case anything goes wrong.
When plumbing issues come up, you need to be prepared. As a homeowner you will need to have some basic plumbing tools, as well as the knowledge to be able to use them. The tips you have found above should go a long way towards preparing you to deal with a plumbing problem when it occurs.
No comments:
Post a Comment